Sectional garage doors open vertically upwards. This saves space inside and in front of the garage and keeps free the whole entrance. Sectional garage doors always match – regardless of whether the opening of the garage is rectangular or oblique, has partial or semicircular arc.

They have a wide range of electrostatic paint (AKZO NOBEL) with excellent resistance to external conditions and excellent color retention.

Sectional doors open vertically upwards and hung from the ceiling to save space. This constructional principle means you can fully use the space within and above the garage for parking.

They have the ability of manual and electrical operation. Sectional garage doors that NEW DOOR uses have a wide range of safety products such as safety spring, pressure-sensitive rubber or motion detection photocells and finger protection.

 

Description

You can choose your sectional garage door with extra features and combinations with windows, aluminum frames with glass and pedestrian doors.

  • Double skinned panels of galvanized stucco steel sheet with thickness 0,5 mm of heat insulation hard polyurethane 45 kg/m3. Total panel thickness 42mm.
  • Stucco surface which perfectly combines the modern with the classic and gives the door maximum endurance and protection against possible damage.
  • Wide range of powder coating colors (AKZO NOBEL) with excellent resistance to outdoor conditions and excellent color retention. With complete response to the requirements of all major European architectural standards BS EN 12206:2004 PART I, QUALICOAT CLASS I and GSB.
  • Heavy type guides and case of galvanized steel sheet thickness 2mm.
  • Adjustable torsion springs in a steel reinforced shaft for better balance of the sectional door.
  • Hinges of metal galvanized steel heavy type thickness 2,5 mm (for doors over 4m).
  • Hinges from plastic which guarantee quiet operation (for doors up to 4m).

Special rubbers from EPDM which adjust to all door types, increasing sealing and minimizing losses of ventilation. They are placed:

  • Laterally throughout the height.
  • Intermediate in joints.
  • Double bottom profile at bottom panel of the door.
  • In the last upper panel adjoining to the front of the frame.

NEW DOOR offers a wide range of products relating to security and providing maximum protection:

  • Spring failure device. Adjusts the shaft of the sectional door and prevents undesirable movement of the door downwards in case of spring damage.
  • Safety edge or motion detection photocells whose installation is essential when the door is remotely operated in accordance with safety standard EN 13241-1.
  • Finger protection. Specially planned and designed panel that during closing prevents the trapping of fingers between the panels.

Innovative new product

NEW DOOR constantly drawing attention in the research and the safety of its products with basic aim of providing effective customer service. So it presents a technological innovation, a combination of safety and aesthetic, built-in door with a minimum threshold. A completely functional solution that facilitates the crossing of pedestrians as well as small wheeled machines something which was considered very difficult regarding the existing technology.

Possibility of manual operation. The sectional garage door can be accompanied by a security lock. It works with two-point locking rods (left-right) with the help of a sprocket in a cylinder. The lock is suitable for garage doors as well as small industrial doors.

Operating modes of horizontal lifting:

  • Double Guide (20cm)
  • Double Guide (18cm)
  • Double Guide (16cm springs back)
  • Single guide (42cm)

Possibility of motorized operation. With single-phased motors with guides – mostly with chain – with a choice of their length in accordance with the requirements of each case. Certain models are also available belt driven. Advantages included:

  1. built-in lamp
  2. release lock
  3. limit switches
  4. power regulating
  5. possibility of discontinuation at any point
  6. silent operation
  7. elegant design
  8. A remote control, button, key selector, keyboard, photocell, flasing, antenna, safety edge etc. can be adapted.

Certifications

Ι. Security Requirements for dimension 600×350 in accordance with European Standart EN 13241-1 conserns:

  • dangerous materials
  • safe Mode
  • operating forces
  • wind load

ΙΙ. Quality ISO 9001:2008

Panels

1_SPASTI_GKARAZOPORTA_RABOTE
S1 RABOTE

Galvanized double-walled steel panel filled with inflated polyurethane.

Panel type designed with horizontal stripes at a distance of 110mm & 120mm for a uniform final look.

All door heights can be made by combining height panels h: 480 and h: 600, without affecting the final appearance of the door.

S1 is a versatile panel pattern and can be easily combined with the look of most buildings.

Available in two types of surface: Stucco (G) and Sandgrain (L).

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S1-G 480 S1-G 600 S1-L 480 S1-L 600
Height 480mm 600mm 480mm 600mm
Weight 5,2kg/m 6,2kg/m 5,2kg/m 6,2kg/m
Surface Stucco Stucco Sandgrain Sandgrain

2_SPASTI_GKARAZOPORTA_TAMPLADOTI
S2 TABLADOTO

Galvanized double-walled steel panel filled with inflated polyurethane.

Square pattern with adjustable distance between the squares to achieve the final harmonious appearance.

In case of a pedestrian door, the right combination of boards and the appropriate distance are selected in order to avoid cutting the squares.

This panel pattern can be made in any door dimensions as long as the surface of the panels is Stucco (G).

Available in one type of surface: Stucco (G) .

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S2-G 480 S2-G 600
Height 480mm 600mm
Weight 5,2kg/m 6,2kg/m
Surface Stucco Stucco

3_SPASTI_GKARAZOPORTA_ISIO
S3 PLANE

Galvanized double-walled steel panel filled with inflated polyurethane.

The S3 is a modern panel pattern and can be easily adapted to multiple doors that are part of buildings with straight surfaces, thus enhancing their final appearance.

Due to the minimalist design it is quite easy to match any type of masonry.

Available in two types of surface: Stucco (G) and Sandgrain (L).

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S3-G480 S3-G600 S3-L480 S3-L600
Height 480mm 600mm 480mm 600mm
Weight 5,2kg/m 6,2kg/m 5,2kg/m 6,2kg/m
Surface Stucco Stucco Sandgrain Sandgrain

4_SPASTI_GKARAZOPORTA_MONORIGO
S4 MONORIGO

Galvanized double-walled steel panel filled with inflated polyurethane.

The S4 is a pattern split in half with a line along the panel.

In this way the impression of a heavy and durable construction is given.

It is mainly used in buildings with neoclassical exterior design, but can be adapted to any building.

Available in two types of surface: Stucco (G) and Sandgrain (L).

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S4-G 480 S4-G 600 S4-L 480 S4-L 600
Height 480mm 600mm 480mm 600mm
Weight 5,2kg/m 6,2kg/m 5,2kg/m 6,2kg/m
Surface Stucco Stucco Sandgrain Sandgrain

5_SPASTI_GKARAZOPORTA_POLIRIGO
S5 POLIRIGO

Galvanized double-walled steel panel filled with inflated polyurethane.

S5 is a unique panel.

The smooth straight lines that cross it make its appearance more powerful and impressive.

It is a durable and elegant panel.

Available in one type of surface: Stucco (G) .

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S5-L 480 S5-L 600
Height 480mm 600mm
Weight 5,2kg/m 6,2kg/m
Surface Sandgrain Smooth Sandgrain Smooth

6_SPASTI_GKARAZOPORTA_TOPLINE
S6 TOPLINE

Galvanized double-walled steel panel filled with inflated polyurethane.

S6 is a pattern with a line along the panel.

In this way the impression of a heavy and durable construction is given.

It is mainly used in buildings with neoclassical exterior design, but can be adapted to any building.

Available in two types of surface: Stucco (G) and Sandgrain (L).

  • Sheet Metal Thickness inside / outside 0.4 / 0.5mm.
  • Panel Total Width 42 (+/- 1mm)
  • Polyurethane Density 42 (+/- 1kg / m3).
PANEL S4-G 480 S4-G 600 S4-L 480 S4-L 600
Height 480mm 600mm 480mm 600mm
Weight 5,2kg/m 6,2kg/m 5,2kg/m 6,2kg/m
Surface Stucco Stucco Sandgrain Sandgrain

** Interior side of panel always in color RAL 9002.

Pedestrian doors

PEDESTRIAN DOORS

anthropothurida_kanoniko_katokasi
Pedestrian Door Normal Threshold (NT)

The pedestrian door can be placed on any type of door as well as on any type of panel. This type of pedestrian door is a durable and stable construction. Its lower edge is located 200mm from the lower edge of the door. Its basic version includes a lock with handle and a security key, automatic closing and magnetic switch. In addition you can choose to place a panic bar if you wish.

anthropothurida_xamilo_katokasi
Pedestrian Door Low Threshold (LT)

The pedestrian door with low threshold is a very useful addition to your folding garage door as it makes access much easier. It only has a base 27 mm from the ground making it so easy for prams and other wheeled items to pass. This version of the pedestrian door can only be installed in a sectional garage door with a maximum width of up to 5000mm. Ideal for frequent use. Can be used as an emergency exit when equipped with a panic bar (not included as standard). Tested and approved product in accordance with European regulations.

mi_ensomatomeni_anthropothirida
Pedestrian Door Non Incorporated (NI)

The non-integrated pedestrian door is usually constructed when the opening is wide enough to fit both the pedestrian door and the sectional garage door. It is made with metal beams combined with various aluminum profiles and matches the appearance of the folding garage door. The frame above the pedestrian door is made either with the same panels with the sectional garage door or simply with metal beams as the case may be.

Smart solution

A pedestrian door is always useful especially in places where pedestrian crossing is frequent. Pedestrian doors are a smart and practical solution for all cases where the passage must be used frequently. This way you can avoid unnecessary opening of the sectional garage door, protecting it from wear and tear.

Gives longer life to your door.

Security

Each pedestrian door is accompanied by an automatic security closure, so that the door remains closed after each use. It is also accompanied with a magnetic safety switch that stops the operation of the sectional garage door when the pedestrian door is open.

Energy saving

During the winter or summer season, when the requirements for heating or cooling are greater, a manhole can prove to be a very effective way to save money and energy.

Options

Pedestrian door can be placed in the center or at one of the two ends of the sectional garage door at a minimum distance of 400mm from the edge.

Maximum construction dimensions W: 1200 x H: 2200mm.

A pedestrian door can be installed on both polyurethane panels and aluminum panels.

Certification

Maximum dimensions of a sectional garage door with integrated pedestrian door. 

W: 6000mm x H: 6000mm, wind pressure resistance Class 2.

Windows

WINDOWS

Windows made of polycarbonate material double glazing with perimeter sealing rubber and with the use of different types of windows. Different facets of doors can be constructed. Available in various standard dimensions adding more lighting outdoors.

squareorthogonioparalillogrammoorthogonio225kampulo

Glass aluminium frames

GLASS ALUMINUM FRAMES

Glass aluminium frames made of polycarbonate material single glazing. In the case of glass, polyurethane panels are replaced by aluminium profile with PLEXI GLASS 5mm thickness. The dimensions of the glasses vary in width and height and are shaped appropriately according to the dimensions of each door.

200_0595Tzamoti_4_tzamia.298

Videos